Forums59
Topics1,040,153
Posts13,976,420
Members144,228
|
Most Online39,925 Dec 30th, 2023
|
|
2015 Legend V20 Setup
#15054542
04/23/24 03:04 AM
|
Joined: Oct 2006
Posts: 7,510
Hook'Em 79
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Oct 2006
Posts: 7,510 |
So my original motor blew and I took the plunge and bought a new 2024 Mercury 4 stroke.
Shop told me I could run same prop but I’m about 11 hours in and not getting the speed or rpm’s I was getting with the old motor. Old motor would hit 69-70 mph @ 5850 rpm’s.
New motor is turning 5650 rpm’s and getting to around 64.5 mph.
I have a 12” manual jackplate that they said I shouldn’t have to mess with either.
25P tempest 3 blade prop
Any suggestions?
|
|
Re: 2015 Legend V20 Setup
[Re: Hook'Em 79]
#15054648
04/23/24 12:06 PM
|
Joined: Jan 2005
Posts: 17,232
Pat Goff
TFF Guru
|
TFF Guru
Joined: Jan 2005
Posts: 17,232 |
Are you sure the motor is out of break in mode? It won't do anything right until then.
If it is, then what's the boat telling you? Is it running flat? No lift? High roostertail? Really stiff steering? You're too high on the plate.
No tail? Steering is numb? You're too low.
If you know the height is correct, then next step is Josh at Steve's prop on Fork. That motor needs to run at the top of it's rpm range to produce horsepower, lugging it won't work at all. Prop pitch is like gears in your truck, you have to match the pitch to what your motor wants. Is that going to get you five mph? Maybe, all you can do is find your potential, whatever happens happens.
Pat Goff Seadrift TX
|
|
Re: 2015 Legend V20 Setup
[Re: Hook'Em 79]
#15054675
04/23/24 12:42 PM
|
Joined: Apr 2017
Posts: 12,322
tmd11111
TFF Guru
|
TFF Guru
Joined: Apr 2017
Posts: 12,322 |
Four stroke Mercs rev to 6200 rpms. When going from a 2 stroke you need to drop 1-2" in pitch. Also need to have the throttle checked to make sure its getting 100%. That needs to be done by dealer.
|
|
Re: 2015 Legend V20 Setup
[Re: Hook'Em 79]
#15055401
04/24/24 02:36 AM
|
Joined: Oct 2006
Posts: 7,510
Hook'Em 79
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Oct 2006
Posts: 7,510 |
They did check that it’s getting 100% throttle before I left, I remember that.
They also told me my prop would be fine but I don’t know all the specifics on what makes what does what.
It seems to drive and handle the same as the old motor rooster tail and all. Just doesn’t have the max rpm or the speed.
|
|
Re: 2015 Legend V20 Setup
[Re: Hook'Em 79]
#15055406
04/24/24 02:40 AM
|
Joined: Oct 2006
Posts: 7,510
Hook'Em 79
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Oct 2006
Posts: 7,510 |
Break in mode could still be a thing, it calls for 10 hours of break in but I’m way shorter than I thought I was. As of right now I’m only at 3.6 hours.
Dealer told me vary throttle til 2 hours and then drive it normally but don’t drive it WOT for long periods of time. I haven’t done that but a couple of short outbursts just to see what she would do and the results are what is concerning me.
|
|
Re: 2015 Legend V20 Setup
[Re: Hook'Em 79]
#15055441
04/24/24 03:09 AM
|
Joined: Jan 2005
Posts: 17,232
Pat Goff
TFF Guru
|
TFF Guru
Joined: Jan 2005
Posts: 17,232 |
Yeah until the computer lets it go full power you don’t know what you’ve got.
Pat Goff Seadrift TX
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|