What’s the best way to setup livescope on your boat dock to fish the fish under and around

I could see where a small wheel attached to a pole mount system would be pretty cool.

I would use some 1" pvc and make a pole to mount it on, use conduit straps to mount to the edge of the dock.

https://www.homedepot.com/p/Oatey-1-in-Copper-2-Hole-Pipe-Hanger-Strap-33518/303434709#overlay

battery box with a 50ah lithium and mount the black box to the top, store extra wire in battery box.

a small wagon (radio flyer type) to mount the graph, battery box and store the ducer when not used.

how I would do it anyway.

I made one out of a Plano ammo box. Mounted the GLS10 to the inside and put a Dakota lithium battery in with it. Mounted the graph to the lid. I made the pole out of PVC with a larger diameter outside pole and a smaller diameter inside with a t handle on top to turn it. I strapped a shelf bracket to the outer pole and installed a magnet on the bracket. Our dock is steel so I just slap it on the rail and turn it to where I want it. Works great and I can move it around the dock no problem.

Sorry about the flip.

Deep dock !!!

No kidding