|
Forums59
Topics1,041,386
Posts13,999,470
Members144,256
| |
Most Online39,925
Dec 30th, 2023
|
|
 Re: Shut Up And Fish - ProDucer
[Re: SoonerDG]
#15017551
03/15/24 02:44 PM
|
Joined: Feb 2006
Posts: 3,637
gborg
TFF Team Angler
|
|
TFF Team Angler
Joined: Feb 2006
Posts: 3,637 |
Ah, I see what you're saying. I do think the ProDucer helps with this some since it's mounted out in front of the bow. So when I approach a dock the boat can turn nearly 180 degrees and I can still keep the transducer pointed at the dock. If the boat turns completely stern to the dock then it's a bit more sketchy since the boat can get in the way of the transducer if it's not deep enough in the water. When I had it deck mounted on the starboard side it was difficult to scan if the boat turned port side to the dock. Plus, the twist handle on the ProDucer allows you to turn the pole almost 360 degrees without the handle getting hard to reach.
Thanks, that is what I needed to know.
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Woj]
#15020927
03/19/24 11:34 AM
|
Joined: Mar 2005
Posts: 93
EastTexNative
Outdoorsman
|
|
Outdoorsman
Joined: Mar 2005
Posts: 93 |
How does it handle rough water running? Is it stable and robust enough?
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: EastTexNative]
#15021069
03/19/24 02:43 PM
|
Joined: Mar 2002
Posts: 4,470
Slewfoot
TFF Team Angler
|
|
TFF Team Angler
Joined: Mar 2002
Posts: 4,470 |
How does it handle rough water running? Is it stable and robust enough? David makes top notch stuff!! You wonโt have any problems.
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: EastTexNative]
#15021406
03/19/24 08:53 PM
|
Joined: Nov 2007
Posts: 16,090
KidKrappie
TFF Guru
|
|
TFF Guru
Joined: Nov 2007
Posts: 16,090 |
How does it handle rough water running? Is it stable and robust enough? Yes it is! As stated above, he makes solid products. Rough water is no problem!
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Woj]
#15022131
03/20/24 03:08 PM
|
Joined: Feb 2006
Posts: 3,637
gborg
TFF Team Angler
|
|
TFF Team Angler
Joined: Feb 2006
Posts: 3,637 |
What device is the little turn handle attached to a " pro ducer " looking set up. Thomas Fishing uses one and a few others on you tube. No handle just the turn handle that moves the transducer ?? It has a long cable attached to ??
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Woj]
#15042307
04/10/24 01:45 PM
|
Joined: Jan 2008
Posts: 171
Woj
OP
Outdoorsman
|
|
OP
Outdoorsman
Joined: Jan 2008
Posts: 171 |
PSA: the head on the Ultrex Quest is not the same as the Ultrex, and the Ultrex bracket doesn't fit the Quest......
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Woj]
#15042373
04/10/24 02:43 PM
|
Joined: Feb 2010
Posts: 12,131
shut-up-and-fish
TFF Guru
|
|
TFF Guru
Joined: Feb 2010
Posts: 12,131 |
PSA: the head on the Ultrex Quest is not the same as the Ultrex, and the Ultrex bracket doesn't fit the Quest...... Correct...Ultrex is Ultrex and Ultrex Quest is Ultrex Quest. They are not the same. I will be working on an Ultrex Quest mount soon.
![[Linked Image]](https://farm5.staticflickr.com/4214/35243190830_389843bb65_n.jpg) www.shut-up-and-fish.comFrom *Sales, *Installation Services, and *On the shop floor Education & Instructional Tips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota & Motorguide needs plus much more - Call Now 972 822 9285
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Woj]
#15042996
04/11/24 12:29 AM
|
Joined: May 2005
Posts: 411
Txbassin
Angler
|
|
Angler
Joined: May 2005
Posts: 411 |
What's the difference between the pole ducer and producer?
NO FISH NO FRIEND !!!!!
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Txbassin]
#15043333
04/11/24 01:06 PM
|
Joined: Feb 2010
Posts: 12,131
shut-up-and-fish
TFF Guru
|
|
TFF Guru
Joined: Feb 2010
Posts: 12,131 |
What's the difference between the pole ducer and producer?
The Pole Ducer was our very 1st edition pole system. We continued to enhance the product and so we gave it a new name as well.
www.shut-up-and-fish.comFrom *Sales, *Installation Services, and *On the shop floor Education & Instructional Tips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota & Motorguide needs plus much more - Call Now 972 822 9285
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Woj]
#15047877
04/16/24 04:39 PM
|
Joined: Jul 2010
Posts: 1,787
F4 Gator
Extreme Angler
|
|
Extreme Angler
Joined: Jul 2010
Posts: 1,787 |
I've been using the ProDucer for about a month. I used a Pole Ducer previously for 3.5 years. Both are great products. I like the ease of stowing the trolling motor and the ProDucer, it's a lot quicker than stowing 2 pieces of equipment, plus opens open some room on the front deck. David provides great service and his prices are very reasonable! 
![[Linked Image]](https://fas.org/man/dod-101/sys/ac/f4_2s.jpg) Phormer Phantom Phlyer
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: shut-up-and-fish]
#15052819
04/21/24 01:07 PM
|
Joined: May 2005
Posts: 411
Txbassin
Angler
|
|
Angler
Joined: May 2005
Posts: 411 |
Can the pole ducer be upgraded to the ProDucer?
NO FISH NO FRIEND !!!!!
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Txbassin]
#15052932
04/21/24 02:33 PM
|
Joined: Feb 2010
Posts: 12,131
shut-up-and-fish
TFF Guru
|
|
TFF Guru
Joined: Feb 2010
Posts: 12,131 |
Can the pole ducer be upgraded to the ProDucer? Depending on which option you have. Give me a call and we can discuss it... ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2024/04/full-46975-221926-2404063640_855530196270099_855881026872432576_n.jpg)
www.shut-up-and-fish.comFrom *Sales, *Installation Services, and *On the shop floor Education & Instructional Tips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota & Motorguide needs plus much more - Call Now 972 822 9285
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: Woj]
#15092030
06/04/24 07:38 PM
|
Joined: Mar 2016
Posts: 889
canyoncreek06
Pro Angler
|
|
Pro Angler
Joined: Mar 2016
Posts: 889 |
It's a shame that the Ultrex mounting bracket can not be purchased separately as an upgrade to the original pole ducer. I purchased a pole ducer less than a year ago and just got a new boat with an Ultrex. Seem like all that would be needed to convert my existing side mounted pole to a TM mount would be the bracket, an additional locking collar for the bottom side of the sleeve and a spot cut out in the existing pole to let the transducer wire through.
Columbus took a chance and he made it.
|
|
|
Re: Shut Up And Fish - ProDucer
[Re: canyoncreek06]
#15092698
06/05/24 01:11 PM
|
Joined: Feb 2010
Posts: 12,131
shut-up-and-fish
TFF Guru
|
|
TFF Guru
Joined: Feb 2010
Posts: 12,131 |
It's a shame that the Ultrex mounting bracket can not be purchased separately as an upgrade to the original pole ducer. I purchased a pole ducer less than a year ago and just got a new boat with an Ultrex. Seem like all that would be needed to convert my existing side mounted pole to a TM mount would be the bracket, an additional locking collar for the bottom side of the sleeve and a spot cut out in the existing pole to let the transducer wire through.
I can sell you the mount and additional components however, it will be the same cost as purchasing the entire system. As advised, It is a kit as we purchase one of all to make up each system.
www.shut-up-and-fish.comFrom *Sales, *Installation Services, and *On the shop floor Education & Instructional Tips We have you covered here @ shut-up-and-fish for all of your Humminbird, Lowrance, Garmin, Minn Kota & Motorguide needs plus much more - Call Now 972 822 9285
|
|
Moderated by banker-always fishing, chickenman, Derek ๐, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
